모듈:Infobox dim

이 모듈은 물체의 물리적 크기에 관한 정보를 geohack 또는 mapframes용 매개변수로 변환하는 코드이다.

다음 매개변수를 통해 물체의 물리적 크기 정보를 본 모듈로 변환할 수 있다.

• length_km
• length_mi
• width_km
• width_mi
• area_km2
• area_mi2
• area_ha
• area_acre

배율을 지정할 때 모듈은 |viewport_cm= 또는 |viewport_px=를 통해 지정된 화면상 물체 크기를 사용할 수 있다. geohack과 일치하도록 기본값은 10 cm로 설정되어 있다.

또한, 이 모듈은 다음과 같은 geohack 매개변수를 받아들여 변환할 수 있다.

• dim
• scale
• type (예: "mountain" 또는 "city")
• population (type="city"인 경우에만 해당)

사용법

{{#invoke:Infobox dim|dim}}

geohack 링크에 적합한 dim 문자열(예: "24km")을 생성한다.

{{#invoke:Infobox dim|scale}}

geohack 링크에 적합한 배율(예: 100000)을 생성한다.

{{#invoke:Infobox dim|zoom}}

mapframes 사용에 적합한 오픈스트리트맵 확대 수준(예: 12)을 생성한다.

---

require('strict')
local getArgs = require('Module:Arguments').getArgs
local p = {}

local log2 = 0.693147181
local ppm = 1000/0.3  -- pixels per meter, from 0.3 mm / pixel from https://wiki.openstreetmap.org/wiki/Zoom_levels

-- To convert to OSM zoom level, we need to know meters per pixel at zoom level 9
-- On the equator, it's 305.748 meters/pixel according to https://wiki.openstreetmap.org/wiki/Zoom_levels
-- This quantity depends on the latitude (which we usually don't have easy access to)
-- Instead, we'll be correct at 38 degrees N, given en-WP bias towards NA and Europe
-- 38N was chosen because:
--   * It's the furthest north where scale=100000 maps to zoom=12
--   * One hemisphere (20000km) maps to zoom=1
local mppl9Equator = 305.748

-- Convert from Geohack's scale to OSM style zoom levels as used by <maplink>
local function geohackScaleToMapZoom(scale,latitude)
	scale = tonumber(scale)
	if not scale or scale <= 0 then return end
    latitude = latitude or 38
    local mppl9 = mppl9Equator*math.cos(math.rad(latitude))
	return math.log(mppl9*ppm/scale)/log2 + 9
end

-- compute the viewport size (on screen) in meters, assuming ppm pixels per  meter on screen
local function computeViewport(args)
	local viewport_cm = tonumber(args.viewport_cm)
	local viewport_px = tonumber(args.viewport_px)
	return viewport_cm and viewport_cm / 100 or viewport_px and viewport_px / ppm
	       or tonumber(args.default_viewport) or 0.1
end

-- convert from geohack dim (knowing the viewpoint size on screen) to geohack scale
local function geohackDimToScale(dim, args)
	dim = tonumber(dim)
	args = args or {}
	if not dim or dim <= 0 then return end
	local units = args.units
	if units and string.lower(units) == 'km' then
		dim = dim*1000
	end
	return dim / computeViewport(args)
end

-- inverse of above function, returning dim in km
local function geohackScaleToDim(scale, args)
	scale = tonumber(scale)
	args = args or {}
	if not scale or scale <= 0 then return end
	return scale * computeViewport(args) * 1e-3
end

local oddShape = 2.09 --- length/sqrt(area) of Boston (to choose an example)

-- Convert from Geohack's types to Geohack dim
local function geohackTypeToDim(args)
	local t = args.type
    if not t then return end
	local typeDim = mw.loadData('Module:Infobox_dim/data')
	local dim = typeDim[t]
	local population = tonumber(args.population)
	if t == 'city' and population and population > 0 then
		-- assume city is a circle with density of 1000/square kilometer
		-- compute diameter, in meters. Then multiply by oddShape to account for weird shapes
		dim = 35.68e-3*math.sqrt(population)*oddShape
		-- don't zoom in too far
		if dim < 5 then
			dim = 5
		end
	end
	return dim		
end

-- Convert from dimension of object to Geohack dim
local function computeDim(length,width,area)
	if length and width then
		return math.max(length,width)
	end
	if length then return length end
	if width then return width end
	if area then return oddShape*math.sqrt(area) end
end

-- compute geohack dim from unit arguments (e.g., length_mi)
local function convertDim(args)
	local length = args.length_mi and 1.60934*args.length_mi or args.length_km
	local width = args.width_mi and 1.60934*args.width_mi or args.width_km
	local area = args.area_acre and 0.00404686*args.area_acre or 
		args.area_ha and 0.01*args.area_ha or 
		args.area_mi2 and 2.58999*args.area_mi2 or args.area_km2
	local dim = computeDim(length, width, area)
	return dim
end

local function computeScale(args)
	if args.scale then return args.scale end
	local dim, units, scale
	if args.dim then
		dim, units = mw.ustring.match(args.dim,"^([-%d%.]+)%s*(%D*)")
		args.units = units
		args.default_viewport = 0.1  -- default geohack viewpoirt
		scale = geohackDimToScale(dim, args)
	end
	if not scale then
		dim = convertDim(args) or geohackTypeToDim(args)
		args.units = 'km'
		args.default_viewport = 0.2 --- when object dimensions or type is specified, assume 20cm viewport
		scale = dim and geohackDimToScale(dim, args)
	end
	if not scale then return end
	scale = math.floor(scale+0.5)
	-- keep scale within sane bounds (OSM zoom levels 1-17)
	if scale < 1600 then
		scale = 1600
	end
	if scale > 200e6 then
		scale = 200e6
	end
	return scale
end

-- Argument checking
local positiveNumericArgs = {viewport_cm=true,viewport_px=true,length_mi=true,length_km=true,
                             width_mi=true,width_km=true,area_mi2=true,area_km2=true,
                             area_acre=true,area_ha=true,scale=true,population=true}

local function cleanArgs(args)
    local clean = {}
    if type(args) == 'table' then
        for k, v in pairs(args) do
            if positiveNumericArgs[k] then
                v = v and mw.ustring.gsub(v,",","") -- clean out any commas
                v = tonumber(v)                     -- ensure argument is numeric
                if v and v <= 0 then                -- if non-positive, ignore value
                    v = nil
                end
            end
            clean[k] = v
         end
    end
    return clean
end

-- Module entry points
function p._dim(args)
    args = cleanArgs(args)
	if args.dim then return args.dim end
	-- compute scale for geohack
	local scale = args.scale
	local dim
	if not scale then
		args.default_viewport = 0.2 -- when specifying a object dimension or type, assume output spans 20cm
		dim = convertDim(args) or geohackTypeToDim(args)
		args.units = 'km'
		scale = dim and geohackDimToScale(dim, args)
	end
	-- reset back to 10cm viewport for correct geohack dim output
	args.viewport_cm = 10
	dim = scale and geohackScaleToDim(scale, args)
	return dim and tostring(math.floor(dim+0.5))..'km'
end

function p._scale(args)
    args = cleanArgs(args)
    return computeScale(args)
end

function p._zoom(args)
    args = cleanArgs(args)
	args.viewport_px = args.viewport_px or 200 --- viewport for Kartographer is 200px high
	local scale = computeScale(args)
	if scale then
        local latitude = tonumber(args.latitude)
        latitude = latitude and (latitude > 70 and 70 or latitude < -70 and -70 or latitude)
		local zoom = geohackScaleToMapZoom(scale,latitude)
		return zoom and math.floor(zoom)
	end
end		

-- Template entry points
function p.dim(frame)
	return p._dim(getArgs(frame)) or ''
end

function p.scale(frame)
	return p._scale(getArgs(frame)) or ''
end

function p.zoom(frame)
	return p._zoom(getArgs(frame)) or ''
end

return p